Home
/
Indiana
/
Motorcycles and Parts
/
Long Beach Motorcycles and Parts
/
2010 Honda SH150 I motorcycle/scooter. 91mpg! Under 2K...
2010 Honda SH150 I motorcycle/scooter. 91mpg! Under 2K...
Jun 3, 2024
Description

  Up for sale is my 2010 Honda SH150I moped/scooter/motorcycle. The color is dark metallic red. There are 1,771 miles on it. (Mileage may go up very slightly from usage) Clean title in hand!

  I purchased this bike NEW from Honda Of Michigan City on 4/7/2011 for $4,224.00 on sale. Including $295.68 in tax. Totaling $4,520.18. (Have receipts)

  If you are looking to save gas this bike gets around 91mpg. I can literally put $4 in the tank to last me for the entire week. Compared to filling my SUV up for $60+ every week.

  The bike runs perfectly. No mechanical problems or defects. It starts right up & drives smoothly after it's all warmed up. The only modification I've done to the bike is installing a K&N performance air filter. (Stock filter is included)

  It is a 153cc liquid-cooled single-cylinder four-stroke engine with a Honda V-Matic belt-converter automatic transmission. This bike is pretty fast for its size. I weigh around 165lbs and I've gotten it to about 75mph. Very fast for such a small bike. A motorcycle license is legally required in the state of IN to operate this bike. You don't have to have one to test ride it of you want to buy it. Anyone could drive this bike it's so easy. It's fully automatic so there is no clutch to worry about.

  The trunk was purchased separately from Honda for around $220. It is great for the extra storage. There is a small trunk under the seat big enough for your cell phone, keys, water bottle, ect...

  The cover is included along with the helmet. The helmet is a men's large. The cover was around $60 & so was the helmet.

  It has a pretty bright headlight for night driving, high beam & low beam. A horn, turn signals, foot rest for a second rider.

  Now the only problems with this bike is there are a FEW minor scratches in various spots. Nothing major. Absolutely NO dents/dings or chips in this bike. These scratches are just from daily use. Nothing major, and they probably all could be buffed out. The front wheel nut is also starting to rust as you can see in the picture. It can easily be sanded & painted. I was told that this is due from the way the dealership installed the front wheel, they used a impact that took the paint off, so it started to rust.

  Other then that, there are NO other problems. The leather seat is in excellent condition. This bike was garage stored. The oil was changed around 700 miles along with a new spark plug at the dealership. (Have the service record from Honda also)

  Also everything that came with the bike is included. The manuals & small tool kit.

  This bike was taken care off. Washed regularly & driven lightly. I am selling since I want to upgrade to something bigger. With the low miles, and extras it is a fair deal. You are not buying junk! Of course you can buy a cheap Chinese scooter for half the price, but I guarantee it wont last you as long & you will have more problems with it. Trust me I've had a couple myself before getting this one.

  I accept CASH only. Absolutely no checks. I've been burned before in smaller transactions. Serious buyers only. Please no trades or lowballers. I will not reply. This bike does NOT have to sell so don't waste my time. The only thing I would trade for is another bike that's a manual. Preferably a 2005 or newer. No junk please.

  If you want to see any additional photos then please email or text me.

  Price is FIRM!

  Front Suspension 33mm hydraulic fork; 3.5 inches travel

  Rear Suspension Swingarm with dual hydraulic shocks, spring-preload adjustability; 3.3 inches travel

  Front Brake Single 220mm disc with a two piston caliper (CBS)

  Rear Brake Drum (CBS) 130mm

  Front Tire 100/80-16

  Rear Tire 120/80-16

  DIMENSIONS

  Wheelbase 53.4 inches

  Seat Height 30.9 inches

  Curb Weight 302 pounds

  Fuel Capacity 1.8 gallons, including 0.5-gallon reserve

  Bore And Stroke 58mm x 57.8mm

  Induction Programmed Fuel Injection (PGM-FI) with automatic enricher circuit

  Ignition Digital transistorized with electronic advance

  Compression Ratio 11.0:1

  Valve Train SOHC; two-valve

Comments
Welcome to zdclassified comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments
Other related recommendations
"Only access zdclassified from zdclassified.com and do not follow links sent by other users"
"Share photos and ask lots of questions about the items you are buying and selling"
"If an ad or reply sounds too good to be true, it probably is"
"Don't reply to email addresses hidden in text and pictures"
"Trade in person, use PayPal 'paying for an item or service' to transfer money"
"Trade in person, use PayPal 'paying for an item or service' to transfer money"
Copyright 2023-2024 - www.zdclassified.com All Rights Reserved