IF YOU'RE GOING TO PICK UP, MAKE OFFER FOR 1300. WILL DELIVER FOR THE FULL PRICE IF YOU ARE 9 OR LESS HOURS AWAY.better detailed video: https://drive.google.com/file/d/1aWSGd2ft9ZfSGtkUJGq1z5C87DOaMjLx/view?usp=drive_link4498 mileage. Runs great. The headlights and led strip brake lights were bought separate. Other than some fairing scratches and wear, list of things on the bike that needs work (i still ride it currently, but these need to be addressed eventually):1) front right brake lever needs a metal spring to hold back said lever. [I have it ziptied against the sensor so the brake lights dontstay on unless I'm using the rear brake]. I've been using the rear brake mostly and learned its way easier to control a slide on the back tire than the front and not fall.)2)left clutch lever works fine but its a little loose and should be replaced eventually. the cable is fine.3)been awhile since i had the gear sprockets checked by a mechanic. I'd get them checked.4)tiny hole in seat, barely noticeable, but might get bigger over time. (SEE VIDEO)6)bought a bike tensioner to replace the right side [it fits great, but wasnt designed specifically for my bike]. I used cement contact glue to hold together (the new tensioner is two parts and probably wouldnt come apart regardless but i wanted to be sure. i used a dime on each side as a "wall" along with the glue). Been riding a month and with inspections, no problems. I still have the old tensioner with the connected screw's thread partially broken off. It just need to be welded with a piece of a threaded rod you can get from home depot. Or you can order a brand new pair of them from the company website I bought the bike from for 50$. (venom motorsport usa).