FSI D-9000-MIL-2 Blind Fastener Installation Kit

　　PT-4000 cordless blind riveter

　　Excess of 3,000 lbs pulling force over more than 3/4" of stroke

　　Utilizing the same battery packs and charger as the PT-3000 riveter

　　Standard PT-4000 pulling head assembly is interchangeable with any of the FSI riveters therefore offering redundancy and reduced spare parts

　　Two Batteries are included with one charger

　　Types of rivets installable with the PT-4000 include, but are not limited to, virtually all CherryMax (M7885), Avdel or Cherry Monobolts, Cherry Interlock, Huck Magna-Lok and POP type rivets. The PT-4000 is also capable of installing both 5/32" and 3/16" Blind Bolts (MS90353/54-S/U) with the proper nosepieces (provided in the MIL-1 and MIL-2 kits)

　　PT100M

　　Air motor driven, multiple valve cylinder hydraulic pump assembly

　　Permits Stroke Control Upon trigger actuation, the tool's nose assembly moves forward as long as the trigger is depressed or until maximum stroke is reached

　　Jaw assembly, which holds the rivet stem, remains stationary. Trigger movement allows the user to monitor and control the stroke length of the tool it required. Releasing trigger is provided to eject the stem from the nose assembly after the rivet retention, which in pressure relief system insures tool safety and longevity.

　　Comes with a muffler on the air motor which keeps dirt and sand from accidentally entering the tool when being operated

　　Including CherryMax (thru 1/4") (M7885/NAS9300), Cherrylock "A" / Olympic-lok (NAS1400A), Huck SMLS (NAS1900S), Nutplate rivets (Mil-N-25027), POP rivets (Mil-R-24243), Self-Plugging Rivets (MS20600), and Huck or Cherry Blind Bolts (MS90353/54 S or U).

　　The Kit contains the capability to install Huck Magna-lokH (M7885/10) and Cherry Interlock wire draw rivets in 3/16 and 1/4" inch diameters

　　Contains the pull-up studs and driving anvils used in conjunction with the hand hydraulic D-700 combination riveter-nutsetter which permit installation of blind nuts (NAS1329/30, / MS 27130/31) in sizes 6-32 thru 3/8-16.

　　D700A

　　combination riveter-nutsetter which permit installation of blind nuts

　　The riveter provides over 4,000 lbs of pulling force, and because of its unique two-stage valve system, wrist effort is reduced as the loads increase

　　The photos are representative of the item(s) you will receive, but are not the actual item(s). The item(s) you receive may differ slightly in condition or appearance from the representative photos, but will be substantially the same in terms of their condition, appearance and functionality.