This is a customized constructed darkroom sink with a long superficial area that can hold 16x20 trays and has a deep well section with overflow channel. Sink is six foot however total lengh has to do with seven feet. It was used really little and if dusted off will look virtually new and all set for its first coat of paint or stain as wanted. The wood cabinet was halved to suit an elevator and can merely be pressed together and fastened or simply left loose if wanted. It is revealed rived a little with a close up of it rived farther. The sink is one piece formed made by Delta and I might have some plumbing for this as well. The cost to develop was well over 1000.00 + 500. for the sink + 100 for the plumbing and fixtures. I want to get 600.00 for all of it. I also have a matching custom made Jobo processor cabinet for sale. Telephone call or text just kindly. 814- 462- # 51 % & 78 THANKS The print dryer sitting in the superficial side is not part of this sale. If this number does not work then try 814-46 % 2-51 & 78 thanks!