Up for sale is a USED SPEEDGLAS 9000X Welding Helmet with an Auto-Darkening Filter The mask has a few stains & the clear plastic outside protection plate has scratches on it from prior welding but can probably be purchased and replaced, the battery still works but might need to be replaced

　　comes with the owner's manual

　　An X-tra large viewing area, combined with five user-adjustable dark shades for stick, MIG and TIG welding. For low amp TIG and other welding conditions, the welder can select from three dark shades: 9, 10 and 11.

　　The Speedglas 9000X has a big 4.09" x 2.13" viewing area, with clear, sharp optics and consistent shading across the entire viewing area.

　　A solar panel on the front of the lens cassette helps to power the unit, extending battery life to approximately 3000 hours.

　　Auto-Off: turns off lens 30 minutes after last arc.

　　Immediate-Off: simply hold the ON/OFF button down for two seconds.

　　5 Dark Shades: 5 dark shades (gold numbers) for stick, MIG and TIG; plus 3 dark shades (red numbers) for low-amp TIG and other welding conditions.

　　Sensitivity Adjustment: provides additional adaptability, under a variety of lighting conditions, when in the red ("low-amp TIG") numbers.

　　Shade 3 Light State: for outstanding visibility.

　　Solar Panel: maximizes battery life.

　　Speedglas 9000X Specifications

　　Light Shade: 3

　　Dark Shades: user-adjustable to 9, 10, 11, 12 and 13.

　　Off (Fail-Safe) Shade: nominal 5

　　Viewing Area: 4.09" x 2.13" (104mm x 54mm)

　　Weight, Helmet with Lens: 17.39oz (493g)

　　Battery Life (Average): 3000 hours

　　Operating Temperature: 23 to 131F (-5 to 55C)

　　Standards/Approvals: ANSI Z87.1/CSA Z94.3